The VFC202N is a XPON optical terminal access device that is highly integrated with Wi-Fi 300Mbps. It is the terminal of optical fiber for operator, which supports ultra-bandwidth access through G/E PON upstream technology, and provides users with basic WiFi functions, routing, and gigabit Ethernet functions. The VFC202N upstream network ports are XPON ports. The downstream user ports include 1GE +1FE electrical ports, and WiFi4 WLAN 2.4GHz 300Mbps.

Product Features

  • * 1*xPON interface: SC/UPC (or SC/APC) interface, Support both EPON and GPON
    * 1*Ethernet interface: 10/100/1000Mbps, RJ45, IEEE802.3-2005 standard
    * 1*Ethernet interface: 10/100Mbps, RJ45, IEEE802.3-2005 standard
    * Affordable yet powerful enough xPON ONU

Specifications:

Hardware Specifications
Port 1GE+1FE+WiFi4+G/EPON
LED Indicator  POWER+PON/LOS+INTERNET+LAN+WiFi
Flash & Memory Flash: 64MB; Memory: 128MB;
Power Supply DC 12V/1A
Power Consumption <12W
Environment Standard Operating Temperature: -5~45℃
Storage Temperature: -20~70℃
Operating Humidity: 5%~95% (non-condensing)
Environment Friendly RoHs, CE, CCC
Weight 0.20KG
Size (W*D*H) mm 139mm*132mm*28mm
PON Module Type Class B+, SC/UPC (or SC/APC)
Wavelength UP 1310nm, Down 1490nm
TX Optical power 0.5~5dBm
RX Optical sensitivity -28dBm
Transmission distance 0~20km
Transmission rate EPON: Upstream 1.25Gbps/Downstream 1.25Gbps
GPON: Upstream 1.25Gbps/Downstream 2.5Gbps
LAN Interface type GE: RJ45 (10/100/1000Mbps)
FE: RJ45 (10/100Mbps)
WiFi
WiFi Protocol 2.4GHz supports 802.11b/g/n
Transmit Power 100mW
Antenna Gain 5dBi
  WiFi scanning and ambient RSSI level
Support WDS
Wireless Radio function to be turned on/off
Mesh(Router version)
WLAN Access Capability 64/SSID
Channel 2.4GHz (channel 1-13)
WLAN Security Function WPA-PSK, WPA2-PSK, WPA3, WPA-PSK/WPA2-PSK
AES, AES+TKIP
WiFi Speed 300Mbps (2.4GHz)
Multicast WMM (Wi-Fi Multi Media)
Software Features
Attributes Description
XPON Feature ITU-T G.984.1-4
ITU-T G.988/TR255/TR156
IEEE802.3ah
15 TCONTs/256GEM ports
8 Egress queues per TCONT at least
VLAN/ priority/VEIP gem mapping mode
SN/LOID/SN+Password authentication
Performance monitoring: eth/Gem port
Dying gasp ,LOS, LOSi
Ethernet Port Ethernet port-based VLAN tags and tag removal
MAC address learning
10/100/1000Mbps Auto negotiation
NAT Support DMZ and Virtual server
L2 Feature MAC learning (SVL)/aging
Support max frame length to 2000 bytes
VLAN tagging for untagged packets
Support VLAN 1-4094
L3 Feature PPPoE/Static IP/DHCP
NAT/NAPT
Port forwarding ALG, UPnP, DDNS
IPv4/IPv6 dual stack, DS-Lite Static, and Default Routes
Multiple services on one WAN port
Use LAN port for uplink
VPN L2TP/PPTP/IPSec
Diagnostic Ping Test
Tracert Test
Firewall Anti-DOS
Anti port scan
IPv6 Session Protection
Anti SYN overflow
Anti ICMP echo
Anti ICMP redirect
Anti-Land
Anti-Smurf
Anti-Winnuke
Anti-Ping
QoS Support 8 Queues with Strict Priority
Ethernet port rate limitation
802.1 priority
SP/WRR
Service flow classification
Multicast IGMPv2 (RFC 2236) and IGMPv3 (RFC 3376)
IGMP snooping and IGMP Proxy
MLDv1
Management OMCI/WEB UI/TR069
Telnet/SSH Management with CLI commands
Dual-system software backup and rollback
upgrade by HTTP
The configuration will not be lost after the upgrade
Interface Description
1 POWER 12V/1A, power input interface
2 GE RJ45 10/100/1000M Base-T Ethernet interface
3 FE RJ45 10/100M Base-T Ethernet interface
4 PON G/EPON interface
LED Color Indicates
PWR Green/Solid Normal
OFF No power
LOS Red Optical link is NOT OK (rang: out of -8~-29dBm)
Green/Flash Optical link is OK (rang: in -8~-29dBm)
Green/solid Registered successful and active
Internet Green/solid The WAN interface of the internet is configured
OFF The Internet WAN interface is not configured or the Internet WAN interface is configured but does not take effect.
GE/ Green/Flash Device connected
FE/ Active or Link data receive and transfer (Green/Flash)
  OFF Device not connected
  Link down
WiFi Green/Flash The terminal is connected to transmit data wirelessly
OFF No power/WiFi disable